Thông Tin Octoplus Box JTAG Updates

Thảo luận trong 'New Update' bắt đầu bởi Hùng Lân, 2/3/13.

  1. 235
    38
    28
    Smart_Moto™

    Smart_Moto™ V.I.P

    Tham gia ngày:
    19/5/12
    Bài viết:
    235
    Đã được thích:
    38
    Điểm thành tích:
    28
    Nơi ở:
    http://forum.gpgindustries.com/forum.php
    Web:
    Octoplus Box JTAG v1.6.5 - Ascend Y300 and few Samsungs added!

    [​IMG]
    Octoplus Box JTAG Software v1.6.5 is out!

    Added support for:
    Samsung SCH-R760, Samsung SGH-T559, Samsung SGH-T499V, Huawei Y300-0100!

    Octoplus Box JTAG Software v1.6.5 Release Notes


    • Added support for the following models:

    - Samsung SCH-R760 - added Dead Boot/Device Repair (PDA: FF18; Android: 2.3.6).
    - Samsung SGH-T559 - added Dead Boot/Device Repair (thanks to Mr. Dr_Wolodya).
    - Samsung SGH-T499V - added Dead Boot Repair (PDA: VTKG2; Android: 2.2.2).
    - Huawei Y300-0100 - added Dead Boot Repair (thanks to Mr. Jentz).

    • All pinouts and Repair procedures are described in Software manuals ("Help" button in Software).

    [video=youtube;bekOyZCVNNs]http://www.youtube.com/watch?v=bekOyZCVNNs[/video]



    [​IMG]
    Find out more at: www.octoplusbox.com
    [​IMG][​IMG][​IMG][​IMG][​IMG][​IMG][​IMG][​IMG][​IMG]
     
  2. 1,288
    66
    48
    Hùng Lân

    Hùng Lân Super Moderator Thành viên BQT

    Tham gia ngày:
    21/5/12
    Bài viết:
    1,288
    Đã được thích:
    66
    Điểm thành tích:
    48
    Octoplus Box JTAG v1.6.6 - LG E475F, Samsung T879 and more!
    [HR][/HR][​IMG]
    Octoplus Box JTAG Software v1.6.6 is out!

    Added support for:
    LG E475F, Samsung SGH-T879, Samsung GT-S5367, Samsung GT-S5360B!

    Octoplus Box JTAG Software v1.6.6 Release Notes


    • Added support for the following models:

    - LG E475F - added Dead Boot/Device Repair.
    - Samsung SGH-T879 - added Dead Boot/Device Repair (PDA: UVMA1; Android: 4.0.4).
    - Samsung GT-S5360B - added Dead Boot/Device Repair.
    - Samsung GT-S5367 - added Dead Boot Repair.
    • Uploaded new Repair and FullFlash files for Samsung SGH-T499 (PDA: WXKK4; Android: 2.2.2).
    • Uploaded Custom flash file for Samsung SHV-E110S.
    • All pinouts and Repair procedures are described in Software manuals ("Help" button in Software).

    [​IMG]





     
  3. 1,633
    2,266
    130
    Tiến Luật

    Tiến Luật Lãng Tử Miền Tây Thành viên BQT

    Tham gia ngày:
    24/7/12
    Bài viết:
    1,633
    Đã được thích:
    2,266
    Điểm thành tích:
    130
    Giới tính:
    Nam
    Nơi ở:
    Cột Mốc 241
    Octoplus Box JTAG v1.6.7 - Samsung S5360L/T, S5578 and more! [HR][/HR] [​IMG]
    Octoplus Box JTAG Software v1.6.7 is out!

    Added support for:
    Samsung GT-S5360L, Samsung GT-S5360T, Samsung GT-S5578, Samsung SGH-T499Y!

    Octoplus Box JTAG Software v1.6.7 Release Notes


    • Added support for the following models:

    - Samsung GT-S5360L - added Dead Boot/Device Repair.
    - Samsung GT-S5360T - added Dead Boot/Device Repair.
    - Samsung GT-S5578 - added Dead Boot/Device Repair.
    - Samsung SGH-T499Y - added Dead Boot Repair.
    • Uploaded new Repair and FullFlash files for Samsung SCH-R760 (PDA: GA27; Android: 4.1.2).
    • All pinouts and Repair procedures are described in Software manuals ("Help" button in Software).
    <strong>[video=youtube;YtoZ_xdyqBE]https://www.youtube.com/watch?feature=player_embedded&amp;v=YtoZ_xdyqBE[/video]

    <strong>[video=youtube;AK2V_vufxbE]https://www.youtube.com/watch?feature=player_embedded&amp;v=AK2V_vufxbE[/video]

    Find out more at: www.octoplusbox.com
    [​IMG][​IMG][​IMG][​IMG][​IMG][​IMG][​IMG][​IMG][​IMG]
     
  4. 235
    38
    28
    Smart_Moto™

    Smart_Moto™ V.I.P

    Tham gia ngày:
    19/5/12
    Bài viết:
    235
    Đã được thích:
    38
    Điểm thành tích:
    28
    Nơi ở:
    http://forum.gpgindustries.com/forum.php
    Web:
    Octoplus Box JTAG Software v1.6.8 - Samsung GT-I8552, GT-I8150b and more!

    [HR][/HR] [​IMG]
    Octoplus Box JTAG Software v1.6.8 is out!

    Added support for:
    Samsung GT-I8552, Samsung GT-I8150b Huawei EC306-2, Huawei EC315!

    Octoplus Box JTAG Software v1.6.8 Release Notes


    • Added support for the following models:
    - Samsung GT-I8552 - added Dead Boot/Device Repair (PDA: FF18; Android: 2.3.6).
    - Samsung GT-I8150B - added Dead Boot Repair.
    - Huawei EC306-2 - added Dead Boot/Device Repair (thanks to Mr. myxa_kharkov).
    - Huawei EC315 - added Dead Boot/Device Repair (thanks to Mr. myxa_kharkov).
    • Added new Core ID (47B360E1) for MDM6600.
    • Added new Core IDs (100F80E1, 120F80E1, 120FD0E1) for QSC6085.
    • All pinouts and Repair procedures are described in Software manuals ("Help" button in Software).

    [​IMG]
    Find out more at: www.octoplusbox.com
    [​IMG][​IMG][​IMG][​IMG][​IMG][​IMG][​IMG][​IMG][​IMG]
     
  5. 1,921
    824
    83
    namnhatrang

    namnhatrang Super Moderator Thành viên BQT

    Tham gia ngày:
    20/10/12
    Bài viết:
    1,921
    Đã được thích:
    824
    Điểm thành tích:
    83
    Octoplus JTAG Software v1.6.9 - Samsung GT-S5750E, Huawei U8686 and more! [HR][/HR] [​IMG]
    Octoplus JTAG Software v1.6.9 is out!

    Added support for:
    Samsung GT-S5750E, Pantech P5000, Huawei U1270 and Huawei U8686 (T-Mobile Prism II)!

    Octoplus Box JTAG Software v1.6.9 Release Notes

    • Added support for the following models:

    - Samsung GT-S5750E - added Dead Boot/Device Repair.
    - Pantech P5000 - added Dead Boot/Device Repair (thanks to Mr. Dr_Wolodya).
    - Huawei U1270 - added Dead Boot/Device Repair (thanks to Mr. Dr_Wolodya).
    - Huawei U8686 - added Dead Boot (thanks to Mr. Dr_Wolodya).
    • Uploaded new Repair file for Samsung SPH-L710 (L710VPUDND8_L710SPRDND8_SPR; Android: 4.4.2).
    • All pinouts and Repair procedures are described in Software manuals ("Help" button in Software).
    [​IMG]



     
  6. 203
    3
    18
    congtoan

    congtoan V.I.P

    Tham gia ngày:
    6/5/13
    Bài viết:
    203
    Đã được thích:
    3
    Điểm thành tích:
    18
    Giới tính:
    Nam
    Nghề nghiệp:
    Chuyên phá mobile
    Octoplus Box JTAG Software v1.7.0 Release Notes



    • Added support for the following models:
    - Sony C1504 - added world*s first Unlock, Repair IMEI, improved Repair operation.
    - Sony C1505 - added world*s first Unlock, Repair IMEI, improved Repair operation.
    - Sony ST21i - added world*s first Unlock, Repair IMEI, improved Repair operation.
    - Sony ST21a - added world*s first Unlock, Repair IMEI, improved Repair operation.
    - Sony ST21i2 - added world*s first Unlock, Repair IMEI, improved Repair operation.
    - Sony ST21a2 - added world*s first Unlock, Repair IMEI, improved Repair operation.
    - Sony ST26i - added world*s first Unlock, Repair IMEI, improved Repair operation.
    - Sony ST26a - added world*s first Unlock, Repair IMEI, improved Repair operation.
    - ZTE Z222 - added Dead Boot/Device Repair (thanks to Mr. Dr_Wolodya).

    • Uploaded new Repair file for Pantech P8010.
    • Uploaded full flash file for Samsung GT-S7500.
    • Added new Core ID (406B10E1) for MSM8960.
    • Added new Core ID (503C10E1) for MSM7227T.
    • All pinouts and Repair procedures are described in Software manuals ("Help" button in Software).

    More info and discussion are HERE
    _______________________________________
    WBR,
    Octoplus Box Team
     
  7. 1,921
    824
    83
    namnhatrang

    namnhatrang Super Moderator Thành viên BQT

    Tham gia ngày:
    20/10/12
    Bài viết:
    1,921
    Đã được thích:
    824
    Điểm thành tích:
    83
    Octoplus JTAG v1.7.1 - added IMEI repair for Sony!
    [HR][/HR][​IMG]
    Octoplus JTAG Software v1.7.1 is out!

    WE have added world*s first FREE IMEI Repair and FREE Sony C1604, C1605, Sony ST23i, ST23a, ST23i2, ST23a2 Unlock via JTAG (no server, no credits, no queues, no limits).
    Also added support for Samsung SPH-L720T, Huawei U2800a (MetroPCS) and ZTE Open!

    Octoplus Box JTAG Software v1.7.1 Release Notes


    • Added support for the following models:
    - Sony C1604 - added world*s first Unlock, Repair IMEI, improved Repair operation
    - Sony C1605 - added world*s first Unlock, Repair IMEI, improved Repair operation
    - Sony ST23i - added world*s first Unlock, Repair IMEI, improved Repair operation
    - Sony ST23a - added world*s first Unlock, Repair IMEI, improved Repair operation
    - Sony ST23i2 - added world*s first Unlock, Repair IMEI, improved Repair operation
    - Sony ST23a2 - added world*s first Unlock, Repair IMEI, improved Repair operation
    - Samsung SPH-L720T - added Dead Boot/Device Repair
    - Huawei U2800a (MetroPCS) - added Dead Boot/Device Repair (thanks to Mr. Dr_Wolodya)
    - ZTE Open - added Dead Boot/Device Repair (thanks to Mr. Dr_Wolodya).
    • All pinouts and Repair procedures are described in Software manual ("Help" button in Software).

    [​IMG]



    [​IMG]



    [​IMG]
    Find out more at: www.octoplusbox.com
     
  8. 1,921
    824
    83
    namnhatrang

    namnhatrang Super Moderator Thành viên BQT

    Tham gia ngày:
    20/10/12
    Bài viết:
    1,921
    Đã được thích:
    824
    Điểm thành tích:
    83
    Octoplus JTAG v.1.7.2 - added LG E435x repair via USB
    [HR][/HR][​IMG]
    Octoplus JTAG Software v.1.7.2 is out!

    WE have added boot repair via USB for LG E435, E435F, LG E435G, LG E435K, which are detected by PC as "Qualcomm HS-USB QDloader 9008" device!
    Also added repair via Jtag interface for Prestigio MultiPhone PAP4020 DUO, ZTE Z990G and Samsung SGH-Z370.

    Octoplus Box JTAG Software v.1.7.2 Release Notes


    • Added support for the following models:
    - LG E435 - added Dead Boot Repair via USB
    - LG E435F - added Dead Boot Repair via USB
    - LG E435G - added Dead Boot Repair via USB
    - LG E435K - added Dead Boot Repair via USB
    - Prestigio MultiPhone PAP4020 DUO - added Dead Boot/Device Repair (thanks to Mr. Dr_Wolodya)
    - ZTE Z990G - added Dead Boot/Device Repair (thanks to Mr. Dr_Wolodya)
    - Samsung SGH-Z370 - added Dead Boot/Device Repair (thanks to Mr. Dr_Wolodya)
    • All pinouts and Repair procedures are described in the manual ("Help" button in Software).


    [​IMG]



    [​IMG]
    Find out more at: www.octoplusbox.com
     
  9. 312
    37
    28
    Lucatony_91

    Lucatony_91 V.I.P

    Tham gia ngày:
    31/8/12
    Bài viết:
    312
    Đã được thích:
    37
    Điểm thành tích:
    28
    Nghề nghiệp:
    wwwwwwwwwwwwwwwwww
    Nơi ở:
    Hà Nội
    Octoplus Box JTAG Software v.1.7.3 Release Notes


    Added support for the following models:
    - LG D321 (based on MSM8610) - added Dead Boot Repair via USB
    - LG D325 (based on MSM8610) - added Dead Boot/Phone Repair via USB
    - LG D325 (based on MSM8210) - added Dead Boot/Phone Repair via USB (in test mode)
    - LG D325F8 (based on MSM8610) - added Dead Boot Repair via USB
    - LG D325G8 (based on MSM8610) - added Dead Boot Repair via USB
    - LG P700 - added Dead Boot Repair via USB
    - LG P705 - added Dead Boot Repair via USB
    - LG P705F - added Dead Boot Repair via USB
    - LG P705GO - added Dead Boot Repair via USB
    - LG P708G - added Dead Boot Repair via USB
    - LG P710 - added Dead Boot Repair via USB
    - LG P712 - added Dead Boot Repair via USB
    - LG P713 - added Dead Boot Repair via USB
    - LG P713GO - added Dead Boot Repair via USB
    - LG P713TR - added Dead Boot Repair via USB
    - LG P714 - added Dead Boot Repair via USB
    - LG P715 - added Dead Boot Repair via USB
    - LG P716 - added Dead Boot Repair via USB
    - HTC Desire 300 (0P6A100) - added Dead Boot Repair, Repair CID, Repair IMEI (thanks to Mr. Dr_Wolodya)
    All pinouts and Repair procedures are described in the manual ("Help" button in Software).
    More info and discussion are HERE
    ___________________________________
    WBR,
    Octoplus Box Team
     
  10. 1,921
    824
    83
    namnhatrang

    namnhatrang Super Moderator Thành viên BQT

    Tham gia ngày:
    20/10/12
    Bài viết:
    1,921
    Đã được thích:
    824
    Điểm thành tích:
    83
    Octoplus JTAG v.1.7.4 - more LG devices added for USB repair!
    [HR][/HR][​IMG]
    Octoplus JTAG Software v.1.7.4 is out!

    We have added boot repair via USB and small TP for LG D320, D320F, D320N, D380, D385, MS323,
    which are detected by PC as "Qualcomm HS-USB QDloader 9008" device!

    Also added repair via JTAG interface for LG C410, ZTE Z993, Samsung GT-B6520!

    Octoplus Box JTAG Software v.1.7.4 Release Notes


    • Added support for the following models:
    - LG D320 - added Dead Boot Repair via USB
    - LG D320F - added Dead Boot Repair via USB
    - LG D320N - added Dead Boot Repair via USB
    - LG D380 - added Dead Boot / Device Repair via USB
    - LG D385 - added Dead Boot Repair via USB
    - LG MS323 - added Dead Boot Repair via USB
    - LG C410 - added Dead Boot / Device Repair
    - ZTE Z993 - added Dead Boot Repair (thanks to Mr. Dr_Wolodya)
    - Samsung GT-B6520 - added Dead Boot Repair (thanks to Mr. Dr_Wolodya)
    • All pinouts and Repair procedures are described in the manual ("Help" button in Software).

    To repair mentioned above devices via USB, please follow the next three steps:

    1. Attach testpoint as shown on Figure 1 in the Software manual and connect your phone using Micro USB cable directly into the mainboard’s USB port
      (do NOT use any USB hubs!)
    2. Check PC Device Manager, a new device should appear "Qualcomm HS-USB QDLoader 9008" or "Unknown Device" if you hadn’t installed the driver yet.
      Drivers are in {Installation_Folder}\Driver\QHSUSB
    3. Release testpoint and press “EasyRepair” button in the software (or “Connect” button, when in Advanced Mode)


    [​IMG]

    [video=youtube;LqSQUnpYkJU]https://www.youtube.com/watch?v=LqSQUnpYkJU[/video]

    [​IMG]
    Find out more at: www.octoplusbox.com
     
  11. 1,921
    824
    83
    namnhatrang

    namnhatrang Super Moderator Thành viên BQT

    Tham gia ngày:
    20/10/12
    Bài viết:
    1,921
    Đã được thích:
    824
    Điểm thành tích:
    83
    Octoplus JTAG Software v.1.7.5 - LG D37x, D410x repair via USB and more!

    [​IMG]
    Octoplus JTAG Software v.1.7.5 is out!

    We have added boot repair via USB and small TP for LG D370, D370TR, D373, D373EU, D375, D410, D410H, D410HN,
    which are detected by PC as "Qualcomm HS-USB QDLoader 9008" device!

    Also added repair via JTAG interface for Huawei G510-0010 and Y301-A1 (MetroPCS)!

    Octoplus Box JTAG Software v.1.7.5 Release Notes

    • Added support for the following models:
    - LG D370 - added Dead Boot Repair via USB
    - LG D370TR - added Dead Boot Repair via USB
    - LG D373 - added Dead Boot Repair via USB
    - LG D373EU - added Dead Boot/Device Repair via USB
    - LG D375 - added Dead Boot Repair via USB
    - LG D410 - added Dead Boot/Device Repair via USB
    - LG D410H - added Dead Boot Repair via USB
    - LG D410NH - added Dead Boot Repair via USB
    - Huawei G510-0010 - added Dead Boot Repair (thanks to Mr. Dr_Wolodya)
    - Huawei Y301-A1 (MetroPCS) - added Dead Boot Repair (thanks to Mr. Dr_Wolodya)
    • All pinouts and Repair procedures are described in the manual ("Help" button in Software).


    To repair mentioned above devices via USB, please follow the next three steps:
    1. Attach testpoint as shown on Figure 1 in the Software manual and connect your phone using Micro USB cable directly into the mainboard’s USB port
      (do NOT use any USB hubs!)
    2. Check PC Device Manager, a new device should appear "Qualcomm HS-USB QDLoader 9008" or "Unknown Device" if you hadn’t installed the driver yet.
      Drivers are in {Installation_Folder}\Driver\QHSUSB
    3. Release testpoint and press “EasyRepair” button in the software (or “Connect” button, when in Advanced Mode)


    [​IMG]



    [​IMG]

    Find out more at: www.octoplusbox.com
     
  12. 1,921
    824
    83
    namnhatrang

    namnhatrang Super Moderator Thành viên BQT

    Tham gia ngày:
    20/10/12
    Bài viết:
    1,921
    Đã được thích:
    824
    Điểm thành tích:
    83
    Octoplus JTAG v.1.7.6 - more LG models added for USB repair!

    [​IMG]
    Octoplus JTAG Software v.1.7.6 is out!

    We have added boot repair via USB and small TP for LG D170, D175F, D180F, D400H, D400HN, D405, D405H, D405N, D405TR, D415, D724,
    which are detected by PC as "Qualcomm HS-USB QDloader 9008" device!


    Octoplus Box JTAG Software v.1.7.6 Release Notes

    • Added support for the following models:
    - LG D170 - added Dead Boot/Device Repair via USB
    - LG D175F - added Dead Boot Repair via USB
    - LG D180F - added Dead Boot Repair via USB
    - LG D400H - added Dead Boot Repair via USB
    - LG D400HN - added Dead Boot Repair via USB
    - LG D405 - added Dead Boot Repair via USB
    - LG D405H - added Dead Boot Repair via USB
    - LG D405N - added Dead Boot Repair via USB
    - LG D405TR - added Dead Boot Repair via USB
    - LG D415 - added Dead Boot Repair via USB
    - LG D724 - added Dead Boot/Device Repair via USB
    • All pinouts and Repair procedures are described in the manual ("Help" button in Software).


    To repair mentioned above devices via USB, please follow the next three steps:
    1. Attach testpoint as shown on Figure 1 in the Software manual and connect your phone using Micro USB cable directly into the mainboard’s USB port
      (do NOT use any USB hubs!)
    2. Check PC Device Manager, a new device should appear "Qualcomm HS-USB QDLoader 9008" or "Unknown Device" if you hadn’t installed the driver yet.
      Drivers are in {Installation_Folder}\Driver\QHSUSB
    3. Release testpoint and press “EasyRepair” button in the software (or “Connect” button, when in Advanced Mode)
    [​IMG]



    [​IMG]



    [​IMG]
    Find out more at: www.octoplusbox.com
     
    Hữu Trí and Nam Tiến like this.
  13. 1,921
    824
    83
    namnhatrang

    namnhatrang Super Moderator Thành viên BQT

    Tham gia ngày:
    20/10/12
    Bài viết:
    1,921
    Đã được thích:
    824
    Điểm thành tích:
    83
    Octoplus JTAG v.1.7.7 - more LG models added for USB repair!

    [​IMG]
    Octoplus JTAG Software v.1.7.7 is out!

    We have added boot repair via USB and small TP for LG E980, E980H, LG E985T, E986, LG E988, LG E989,
    which are detected by PC as "Qualcomm HS-USB QDloader 9008" device! Also added repair via JTAG interface for Gigabyte GSmart G1317D.


    Octoplus Box JTAG Software v.1.7.7 Release Notes

    • Added support for the following models:
    - LG E980 - added Dead Boot/Device Repair via USB.
    - LG E980H - added Dead Boot Repair via USB.
    - LG E985T - added Dead Boot Repair via USB.
    - LG E986 - added Dead Boot Repair via USB.
    - LG E988 - added Dead Boot Repair via USB.
    - LG E989 - added Dead Boot Repair via USB.
    - Gigabyte GSmart G1317D - added Dead Boot Repair (thanks to Mr. Dr_Wolodya).
    • All pinouts and Repair procedures are described in the manual ("Help" button in Software).


    To repair mentioned above devices via USB, please follow the next three steps:
    1. Attach testpoint as shown on Figure 1 in the Software manual and connect your phone using Micro USB cable directly into the mainboard’s USB port
      (do NOT use any USB hubs!)
    2. Check PC Device Manager, a new device should appear "Qualcomm HS-USB QDLoader 9008" or "Unknown Device" if you hadn’t installed the driver yet.
      Drivers are in {Installation_Folder}\Driver\QHSUSB
    3. Release testpoint and press “EasyRepair” button in the software (or “Connect” button, when in Advanced Mode)
    [​IMG]



    [​IMG]
    Find out more at: www.octoplusbox.com
     
  14. 1,921
    824
    83
    namnhatrang

    namnhatrang Super Moderator Thành viên BQT

    Tham gia ngày:
    20/10/12
    Bài viết:
    1,921
    Đã được thích:
    824
    Điểm thành tích:
    83
    Octoplus JTAG v.1.7.8 - LG D150, D160 USB repair and more!

    [​IMG]
    Octoplus JTAG Software v.1.7.8 is out!

    We have added boot repair via USB and small TP for LG D150, D157F, D160, D160F, D160G,
    which are detected by PC as "Qualcomm HS-USB QDloader 9008" device!


    Also added repair via JTAG interface for Samsung SGH-T479B and ZTE V880G.

    Octoplus Box JTAG Software v.1.7.8 Release Notes

    • Added support for the following models:

    - LG D150 - added Dead Boot/Device Repair via USB
    - LG D157F - added Dead Boot Repair via USB
    - LG D160 - added Dead Boot/Device Repair via USB
    - LG D160F - added Dead Boot Repair via USB
    - LG D160G - added Dead Boot Repair via USB
    - Samsung SGH-T479B - added Dead Boot/Device Repair
    - ZTE V880G - added Dead Boot Repair (thanks to Mr. Dr_Wolodya)
    • All pinouts and Repair procedures are described in the manual ("Help" button in Software).


    To repair mentioned above devices via USB, please follow the next three steps:
    1. Attach testpoint as shown on Figure 1 in the Software manual and connect your phone using Micro USB cable directly into the mainboard’s USB port
      (do NOT use any USB hubs!)
    2. Check PC Device Manager, a new device should appear "Qualcomm HS-USB QDLoader 9008" or "Unknown Device" if you hadn’t installed the driver yet.
      Drivers are in {Installation_Folder}\Driver\QHSUSB
    3. Release testpoint and press “EasyRepair” button in the software (or “Connect” button, when in Advanced Mode)


    [​IMG]
    Find out more at: www.octoplusbox.com
     
  15. 1,921
    824
    83
    namnhatrang

    namnhatrang Super Moderator Thành viên BQT

    Tham gia ngày:
    20/10/12
    Bài viết:
    1,921
    Đã được thích:
    824
    Điểm thành tích:
    83
    Octoplus JTAG v.1.7.9 - LG D280, D285, D315 USB repair added!

    [​IMG]
    Octoplus JTAG Software v.1.7.9 is out!

    We have added boot repair via USB and small TP for LG D280N, D280G, LG D285, D285F, D285G, D315, D315K,
    which are detected by PC as "Qualcomm HS-USB QDloader 9008" device!

    Octoplus Box JTAG Software v.1.7.9 Release Notes

    • Added support for the following models:
    - LG D280N - added Dead Boot Repair via USB
    - LG D280G - added Dead Boot Repair via USB
    - LG D285 - added Dead Boot/Device Repair via USB
    - LG D285F - added Dead Boot Repair via USB
    - LG D285G - added Dead Boot Repair via USB
    - LG D315 - added Dead Boot Repair via USB
    - LG D315K - added Dead Boot/Device Repair
    • Added new Core ID (107180E1) for Qualcomm APQ8064
    • All pinouts and Repair procedures are described in the manual ("Help" button in Software)
    To repair mentioned above devices via USB, please follow the next three steps:
    1. Attach testpoint as shown on Figure 1 in the Software manual and connect your phone using Micro USB cable directly into the mainboard’s USB port
      (do NOT use any USB hubs!)
    2. Check PC Device Manager, a new device should appear "Qualcomm HS-USB QDLoader 9008" or "Unknown Device" if you hadn’t installed the driver yet.
      Drivers are in {Installation_Folder}\Driver\QHSUSB
    3. Release testpoint and press “EasyRepair” button in the software (or “Connect” button, when in Advanced Mode)

    [​IMG]



    [​IMG]



    [​IMG]
    Find out more at: www.octoplusbox.com
     
  16. 1,921
    824
    83
    namnhatrang

    namnhatrang Super Moderator Thành viên BQT

    Tham gia ngày:
    20/10/12
    Bài viết:
    1,921
    Đã được thích:
    824
    Điểm thành tích:
    83
    Octoplus JTAG Software v.1.8.0 - added LG F240x USB repair and more!
    [​IMG]Octoplus JTAG Software v.1.8.0 is out!

    We have added boot repair via USB and small TP for LG D618, F240K, F240L, F240S and via JTAG for Samsung GT-S5302!

    Octoplus Box JTAG Software v.1.8.0 Release Notes

    • Added support for the following models:
    - LG D618 - added Dead Boot/Device Repair via USB
    - LG F240K - added Dead Boot Repair via USB
    - LG F240L - added Dead Boot Repair via USB
    - LG F240S - added Dead Boot Repair via USB
    - Samsung GT-S5302 - added Dead Boot/Device Repair
    • All pinouts and Repair procedures are described in the manual ("Help" button in Software)


    To repair LG D618, F240K / L / S via USB, please follow the next three steps:
    1. Attach testpoint as shown on Figure 1 in the Software manual and connect your phone using Micro USB cable directly into the mainboard’s USB port
      (do NOT use any USB hubs!)
    2. Check PC Device Manager, a new device should appear "Qualcomm HS-USB QDLoader 9008" or "Unknown Device" if you hadn’t installed the driver yet.
      Drivers are in {Installation_Folder}\Driver\QHSUSB
    3. Release testpoint and press “EasyRepair” button in the software (or “Connect” button, when in Advanced Mode)

    Download Octoplus Box JTAG Software v.1.8.0
    Find out more at: www.octoplusbox.com
     
  17. 1,921
    824
    83
    namnhatrang

    namnhatrang Super Moderator Thành viên BQT

    Tham gia ngày:
    20/10/12
    Bài viết:
    1,921
    Đã được thích:
    824
    Điểm thành tích:
    83
    Octoplus JTAG Software v.1.8.1 - LG F310L, L-04E USB repair and more!
    [​IMG]Octoplus JTAG Software v.1.8.1 is out!

    We have added boot repair via USB and small TP for LG F310L and LG L-04E.
    Also added Boot/Device Repair for Samsung GT-I9210T and HTC Desire (PB99210) via JTAG.


    Octoplus Box JTAG Software v.1.8.1 Release Notes

    • Added support for the following models:
    - LG F310L - added Dead Boot Repair via USB
    - LG L-04E - added Dead Boot Repair via USB
    - Samsung GT-I9210T - added Dead Boot/Device Repair
    - HTC Desire (PB99210) - added Dead Boot/Device Repair, Repair IMEI, Repair CID, Unlock (via Read Codes) (thanks to mr. mathew_di)
    • Improved connect procedure for Dead Boot Repair via USB for the following devices:
    - LG P710
    - LG P712
    - LG P713, P713GO, P713TR
    - LG P714
    - LG P715
    - LG P716
    • All pinouts and Repair procedures are described in the manual ("Help" button in Software)


    To repair F310L and LG L-04E via USB, please follow the next three steps:
    1. Attach testpoint as shown on Figure 1 in the Software manual and connect your phone using Micro USB cable directly into the mainboard’s USB port
      (do NOT use any USB hubs!)
    2. Check PC Device Manager, a new device should appear "Qualcomm HS-USB QDLoader 9008" or "Unknown Device" if you hadn’t installed the driver yet.
      Drivers are in {Installation_Folder}\Driver\QHSUSB
    3. Release testpoint and press “EasyRepair” button in the software (or “Connect” button, when in Advanced Mode)



    Download Octoplus Box JTAG Software v.1.8.1
    Find out more at: www.octoplusbox.com
     
    493/72 CMT8 thích bài này.
  18. 1,921
    824
    83
    namnhatrang

    namnhatrang Super Moderator Thành viên BQT

    Tham gia ngày:
    20/10/12
    Bài viết:
    1,921
    Đã được thích:
    824
    Điểm thành tích:
    83
    Octoplus JTAG v.1.8.2 - LG E960, F200x USB repair and more!
    [​IMG]Octoplus JTAG Software v.1.8.2 is out!

    We have added boot repair via USB and small TP for LG E960, F200K, F200L, F200S, F200LS
    and via JTAG for Samsung GT-B5512 and LG F200L.


    Octoplus Box JTAG Software v.1.8.2 Release Notes

    • Added support for the following models:
    - LG E960 - added Dead Boot / Device Repair via USB
    - LG F200K - added Dead Boot Repair via USB
    - LG F200L - added Dead Boot Repair via USB / JTAG
    - LG F200LS - added Dead Boot Repair via USB
    - LG F200S - added Dead Boot Repair via USB
    - Samsung GT-B5512 - added Dead Boot / Device Repair via JTAG
    • All pinouts and Repair procedures are described in the manual ("Help" button in Software)


    To repair mentioned above devices via USB, please follow the next three steps:
    1. Attach testpoint as shown on Figure 1 in the Software manual and connect your phone using Micro USB cable directly into the mainboard’s USB port
      (do NOT use any USB hubs!)
    2. Check PC Device Manager, a new device should appear "Qualcomm HS-USB QDLoader 9008" or "Unknown Device" if you hadn’t installed the driver yet.
      Drivers are in {Installation_Folder}\Driver\QHSUSB
    3. Release testpoint and press “EasyRepair” button in the software (or “Connect” button, when in Advanced Mode)


    Download Octoplus Box JTAG Software v.1.8.2
    Find out more at: www.octoplusbox.com
     
  19. 2,957
    1,910
    113
    Aqua Sta

    Aqua Sta Moderators Thành viên BQT

    Tham gia ngày:
    31/12/12
    Bài viết:
    2,957
    Đã được thích:
    1,910
    Điểm thành tích:
    113
    Giới tính:
    Nam
    Nơi ở:
    Dịch vụ cài đặt ĐTDĐ Hackphone.us
    Web:
    Octoplus Box JTAG Software v.1.8.3 Release Notes

    • Added support for the following models:
    - LG D851 - added Dead Boot / Device Repair via USB
    - LG D620 - added Dead Boot Repair via USB
    - LG D620K - added Dead Boot Repair via USB
    - LG D620R - added Dead Boot Repair via USB
    - ViewSonic ViewPad 7 (VS13761) - added Dead Boot / Device Repair via JTAG (thanks to Mr. Dr_Wolodya)
    • Uploaded new Full Flash and Repair files for ZTE MF100 (128MB) (thanks to Mr. Dr_Wolodya)
    • All pinouts and Repair procedures are described in the manual ("Help" button in Software)
     
  20. 458
    271
    63
    tminhkhoalx

    tminhkhoalx Unlock TeamClubgsm Thành viên BQT

    Tham gia ngày:
    24/8/13
    Bài viết:
    458
    Đã được thích:
    271
    Điểm thành tích:
    63

Chia sẻ trang này

Thành viên đang xem bài viết (Thành viên: 0, Khách: 0)

Đang tải...