Octoplus Box JTAG Updates

Thảo luận trong 'New Update' bắt đầu bởi Hùng Lân, 2/3/13.

  1. 1,747
    755
    83
    namnhatrang

    namnhatrang Super Moderator Thành viên BQT

    Tham gia ngày:
    20/10/12
    Bài viết:
    1,747
    Đã được thích:
    755
    Điểm thành tích:
    83
    Octoplus JTAG v.1.8.4 - added LG G3 series USB repair!
    [​IMG]Octoplus JTAG Software v.1.8.4 is out!

    We have added boot repair (all in Test Mode) via USB and small TP for LG G3 D852, D852G, D855, D855K and D855P.

    Octoplus Box JTAG Software v.1.8.4 Release Notes

    • Added support for the following models:
    - LG D852 - added Dead Boot Repair via USB (Beta)
    - LG D852G - added Dead Boot Repair via USB (Beta)
    - LG D855 - added Dead Boot Repair via USB (Beta)
    - LG D855K - added Dead Boot Repair via USB (Beta)
    - LG D855P - added Dead Boot Repair via USB (Beta)
    • All pinouts and Repair procedures are described in the manual ("Help" button in Software)

    To repair mentioned above devices via USB, please follow the next three steps:
    1. Attach testpoint as shown on Figure 1 in the Software manual and connect your phone using Micro USB cable directly into the mainboard’s USB port
      (do NOT use any USB hubs!)
    2. Check PC Device Manager, a new device should appear "Qualcomm HS-USB QDLoader 9008" or "Unknown Device" if you hadn’t installed the driver yet.
      Drivers are in {Installation_Folder}\Driver\QHSUSB
    3. Release testpoint and press “EasyRepair” button in the software (or “Connect” button, when in Advanced Mode)


    [​IMG]
    Download Octoplus Box JTAG Software v.1.8.4
    Find out more at: www.octoplusbox.com
     
  2. 1,747
    755
    83
    namnhatrang

    namnhatrang Super Moderator Thành viên BQT

    Tham gia ngày:
    20/10/12
    Bài viết:
    1,747
    Đã được thích:
    755
    Điểm thành tích:
    83
    Octoplus JTAG Software v1.7.0 - added Sony mobiles unlock and IMEI repair!
    [​IMG]Octoplus JTAG Software v1.7.0 is out!

    WE have added world's first FREE IMEI Repair and FREE Sony C1504, C1505, ST21i, ST21a, ST21i2, ST21a2, ST26i, ST26a Unlock via JTAG (no server, no credits, no queues, no limits).
    Also added support for ZTE Z222.!

    Octoplus Box JTAG Software v1.7.0 Release Notes

    • Added support for the following models:

    - Sony C1504 - added world's first Unlock, Repair IMEI, improved Repair operation.
    - Sony C1505 - added world's first Unlock, Repair IMEI, improved Repair operation.
    - Sony ST21i - added world's first Unlock, Repair IMEI, improved Repair operation.
    - Sony ST21a - added world's first Unlock, Repair IMEI, improved Repair operation.
    - Sony ST21i2 - added world's first Unlock, Repair IMEI, improved Repair operation.
    - Sony ST21a2 - added world's first Unlock, Repair IMEI, improved Repair operation.
    - Sony ST26i - added world's first Unlock, Repair IMEI, improved Repair operation.
    - Sony ST26a - added world's first Unlock, Repair IMEI, improved Repair operation.
    - ZTE Z222 - added Dead Boot/Device Repair (thanks to Mr. Dr_Wolodya).
    • Uploaded new Repair file for Pantech P8010.
    • Uploaded full flash file for Samsung GT-S7500.
    • Added new Core ID (406B10E1) for MSM8960.
    • Added new Core ID (503C10E1) for MSM7227T.
    • All pinouts and Repair procedures are described in Software manuals ("Help" button in Software).

    Download Octoplus Box JTAG Software v1.7.0
     
  3. 1,747
    755
    83
    namnhatrang

    namnhatrang Super Moderator Thành viên BQT

    Tham gia ngày:
    20/10/12
    Bài viết:
    1,747
    Đã được thích:
    755
    Điểm thành tích:
    83
    Octoplus JTAG Software v.1.8.6 - we have no rest!
    [​IMG]Octoplus JTAG Software v.1.8.6 is out!

    We have added Boot Repair via JTAG for LG Optimus LTE II F160LV, LG F160K, LG F160S
    and via USB and small TP for LG F70 F370K, LG F370L, F370S.


    Octoplus Box JTAG Software v.1.8.6 Release Notes

    • Added support for the following models:
    - LG F160LV - added Dead Boot/Device Repair via JTAG
    - LG F160K - added Dead Boot Repair via JTAG
    - LG F160S - added Dead Boot Repair via JTAG
    - LG F370K - added Dead Boot Repair via USB
    - LG F370L - added Dead Boot Repair via USB
    - LG F370S - added Dead Boot Repair via USB
    • All pinouts and Repair procedures are described in the manual ("Help" button in Software)

    To repair mentioned above devices via USB, please follow the next three steps:
    1. Attach testpoint as shown on Figure 1 in the Software manual and connect your phone using Micro USB cable directly into the mainboard’s USB port
      (do NOT use any USB hubs!)
    2. Check PC Device Manager, a new device should appear "Qualcomm HS-USB QDLoader 9008" or "Unknown Device" if you hadn’t installed the driver yet.
      Drivers are in {Installation_Folder}\Driver\QHSUSB
    3. Release testpoint and press “EasyRepair” button in the software (or “Connect” button, when in Advanced Mode)

    Download Octoplus Box JTAG Software v.1.8.6
    Find out more at: www.octoplusbox.com
     
  4. 1,747
    755
    83
    namnhatrang

    namnhatrang Super Moderator Thành viên BQT

    Tham gia ngày:
    20/10/12
    Bài viết:
    1,747
    Đã được thích:
    755
    Điểm thành tích:
    83
    Octoplus JTAG Software v.1.8.7 is out!
    [​IMG]Octoplus JTAG Software v.1.8.7 is out!

    We have added Boot Repair via USB and small TP for LG VS930 and LG F160L
    and via JTAG for TeXet TM-3200R, Crius Q7A and Huawei G520-0000!


    Octoplus Box JTAG Software v.1.8.7 Release Notes
    • Added support for the following models:
    - LG VS930 - added Dead Boot Repair via USB
    - LG F160L - added Dead Boot Repair via USB
    - TeXet TM-3200R - Dead Boot/Device Repair via JTAG (thanks to mr. Drunya_L)
    - Crius Q7A - Dead Boot / Device Repair via JTAG (thanks to mr. DZ_Developer)
    - Huawei G520-0000 - added Dead Boot Repair via JTAG (thanks to mr. Dr_Wolodya)
    • All pinouts and Repair procedures are described in the manual ("Help" button in Software)

    To repair LG VS930 and LG F160L via USB, please follow the next three steps:
    1. Attach testpoint as shown on Figure 1 in the Software manual and connect your phone using Micro USB cable directly into the mainboard’s USB port
      (do NOT use any USB hubs!)
    2. Check PC Device Manager, a new device should appear "Qualcomm HS-USB QDLoader 9008" or "Unknown Device" if you hadn’t installed the driver yet.
      Drivers are in {Installation_Folder}\Driver\QHSUSB
    3. Release testpoint and press “EasyRepair” button in the software (or “Connect” button, when in Advanced Mode)

    Download Octoplus Box JTAG Software v.1.8.7
    Find out more at: www.octoplusbox.com
     
    trungchienjp thích bài này.
  5. 1,747
    755
    83
    namnhatrang

    namnhatrang Super Moderator Thành viên BQT

    Tham gia ngày:
    20/10/12
    Bài viết:
    1,747
    Đã được thích:
    755
    Điểm thành tích:
    83
    Octoplus JTAG Software v.1.8.8 is out!
    [​IMG]
    Octoplus JTAG Software v.1.8.8 is out!

    We have added Boot Repair via USB and small TP for LG D165G, LG D415RD, LG VS870
    and via JTAG for HTC HD7 (PD29100) and Huawei E586!


    Octoplus Box JTAG Software v.1.8.8 Release Notes

    • Added support for the following models:

    - LG D165G - added Dead Boot Repair via USB
    - LG D415RD - added Dead Boot Repair via USB
    - LG VS870 - added Dead Boot / Device Repair via USB
    - HTC HD7 (PD29100) - added Dead Boot Repair, Repair IMEI, Repair CID, Read Codes via JTAG (thanks to mr. Chromgsmunlock)
    - Huawei E586 - added Dead Boot Repair via JTAG (thanks to mr. Dr_Wolodya)
    • All pinouts and Repair procedures are described in the manual ("Help" button in Software)


    To repair LG D165G, LG D415RD and LG VS870 via USB, please follow the next three steps:
    1. Attach testpoint as shown on Figure 1 in the Software manual and connect your phone using Micro USB cable directly into the mainboard’s USB port
      (do NOT use any USB hubs!)
    2. Check PC Device Manager, a new device should appear "Qualcomm HS-USB QDLoader 9008" or "Unknown Device" if you hadn’t installed the driver yet.
      Drivers are in {Installation_Folder}\Driver\QHSUSB
    3. Release testpoint and press “EasyRepair” button in the software (or “Connect” button, when in Advanced Mode)

    Download Octoplus Box JTAG Software v.1.8.8
    Find out more at: www.octoplusbox.com
     
  6. 1,747
    755
    83
    namnhatrang

    namnhatrang Super Moderator Thành viên BQT

    Tham gia ngày:
    20/10/12
    Bài viết:
    1,747
    Đã được thích:
    755
    Điểm thành tích:
    83
    Octoplus JTAG Software v.1.8.9 is out!

    [​IMG]
    Octoplus JTAG Software v.1.8.9 is out!

    We have added Boot Repair via USB and small TP for LG P930, LG LU6200
    and via JTAG for HTC One M7 (PN0720000) and Huawei Y300-0000!


    Octoplus Box JTAG Software v.1.8.9 Release Notes


    • Added support for the following models:
    - LG P930 - added Dead Boot Repair via USB
    - LG LU6200 - added Dead Boot Repair via USB
    - Huawei Y300-0000 - added Dead Boot Repair via JTAG (thanks to Mr. Dr_Wolodya)
    - HTC One M7 (PN0720000) - added Dead Boot Repair, Repair IMEI, Repair CID via JTAG
    • All pinouts and Repair procedures are described in the manual ("Help" button in Software)

    To repair LG P930 and LG LU6200 via USB, please follow the next three steps:

    1. Attach testpoint as shown on Figure 1 in the Software manual and connect your phone using Micro USB cable directly into the mainboard’s USB port
      (do NOT use any USB hubs!)
    2. Check PC Device Manager, a new device should appear "Qualcomm HS-USB QDLoader 9008" or "Unknown Device" if you hadn’t installed the driver yet.
      Drivers are in {Installation_Folder}\Driver\QHSUSB
    3. Release testpoint and press “EasyRepair” button in the software (or “Connect” button, when in Advanced Mode)

    Find out more at: www.octoplusbox.com
     
  7. 1,747
    755
    83
    namnhatrang

    namnhatrang Super Moderator Thành viên BQT

    Tham gia ngày:
    20/10/12
    Bài viết:
    1,747
    Đã được thích:
    755
    Điểm thành tích:
    83
    Octoplus JTAG v.1.9.0 is out!
    [​IMG]Octoplus JTAG Software v.1.9.0 is out!

    We have added Boot Repair via USB and small TP for LG P935, LG P936, LG SU640 and via JTAG for ZTE Turkcell T40!

    Octoplus Box JTAG Software v.1.9.0 Release Notes

    • Added support for the following models:
    - LG P935 - added Dead Boot Repair via USB
    - LG P936 - added Dead Boot Repair via USB
    - LG SU640 - added Dead Boot Repair via USB
    - ZTE Turkcell T40 - added Dead Boot Repair via JTAG (thanks to Mr. mathew_di)
    • All pinouts and Repair procedures are described in the manual ("Help" button in Software)


    To repair LG P935, LG P936 and LG SU640 via USB, please follow the next three steps:
    1. Attach testpoint as shown on Figure 1 in the Software manual and connect your phone using Micro USB cable directly into the mainboard’s USB port
      (do NOT use any USB hubs!)
    2. Check PC Device Manager, a new device should appear "Qualcomm HS-USB QDLoader 9008" or "Unknown Device" if you hadn’t installed the driver yet.
      Drivers are in {Installation_Folder}\Driver\QHSUSB
    3. Release testpoint and press “EasyRepair” button in the software (or “Connect” button, when in Advanced Mode)
    Download Octoplus Box JTAG Software v.1.9.0
     
  8. 1,747
    755
    83
    namnhatrang

    namnhatrang Super Moderator Thành viên BQT

    Tham gia ngày:
    20/10/12
    Bài viết:
    1,747
    Đã được thích:
    755
    Điểm thành tích:
    83
    Octoplus JTAG v.1.9.1 is out!
    [​IMG]Octoplus JTAG Software v.1.9.1 is out!

    We have added Boot Repair via USB and small TP for LG E970, LG H220 and via JTAG for Huawei G525-U00, HTC One M7 (PN07110)!

    Octoplus Box JTAG Software v.1.9.1 Release Notes

    • Added support for the following models:
    - LG E970 - added Dead Boot Repair via USB
    - LG H220 - added Dead Boot Repair via USB
    - Huawei G525-U00 - added Dead Boot / Device Repair via JTAG
    - HTC One M7 (PN07110) - added Dead Boot Repair via JTAG, Repair IMEI, Repair CID (thanks to Mr. mathew_di)
    • All pinouts and Repair procedures are described in the manual ("Help" button in Software)


    To repair LG E970 and LG H220 via USB, please follow the next three steps:
    1. Attach testpoint as shown on Figure 1 in the Software manual and connect your phone using Micro USB cable directly into the mainboard’s USB port
      (do NOT use any USB hubs!)
    2. Check PC Device Manager, a new device should appear "Qualcomm HS-USB QDLoader 9008" or "Unknown Device" if you hadn’t installed the driver yet.
      Drivers are in {Installation_Folder}\Driver\QHSUSB
    3. Release testpoint and press “EasyRepair” button in the software (or “Connect” button, when in Advanced Mode)
    Download Octoplus Box JTAG Software v.1.9.1
    Find out more at: www.octoplusbox.com
     
  9. 1,747
    755
    83
    namnhatrang

    namnhatrang Super Moderator Thành viên BQT

    Tham gia ngày:
    20/10/12
    Bài viết:
    1,747
    Đã được thích:
    755
    Điểm thành tích:
    83
    Octoplus JTAG Software v.1.9.2 - One M7, Lumia 520 and more!
    [​IMG]Octoplus JTAG Software v.1.9.2 is out!

    We have added Boot Repair for HTC One M7 (PN07140), Huawei Y300-0151, Nokia Lumia 520 and Samsung GT-S6500D!

    Octoplus Box JTAG Software v.1.9.2 Release Notes

    • Added support for the following models:
    - HTC One M7 (PN07140) - added Dead Boot Repair via JTAG, Repair IMEI, Repair CID (thanks to Mr. mathew_di)
    - Huawei Y300-0151 - added Dead Boot / Device Repair via JTAG (thanks to Mr. DoctorChiguire)
    - Nokia Lumia 520 - added Dead Boot Repair via JTAG (thanks to Mr. mathew_di)
    - Samsung GT-S6500D - added Dead Boot Repair via JTAG, Repair IMEI, Repair CID (thanks to Mr. mathew_di)
    • Added new Repair files for:
    - LG F160K
    - LG D855
    - Samsung SGH-I747 (Android 4.4.2) (thanks to Mr. nky777)
    • Improved Repair operation for LG D855
    • All pinouts and Repair procedures are described in the manual ("Help" button in Software)

    Download Octoplus Box JTAG Software v.1.9.2
    Find out more at: www.octoplusbox.com
     
  10. 3,432
    1,591
    113
    Hữu Trí

    Hữu Trí UnlockPhone Thành viên BQT

    Tham gia ngày:
    17/5/12
    Bài viết:
    3,432
    Đã được thích:
    1,591
    Điểm thành tích:
    113
    Web:
    Octoplus JTAG Software v.1.9.3 is out!



    Octoplus JTAG Software v.1.9.3 is out!

    Here is the small update, while we are focused on bigger things.. We're not dead, we're not sleeping. We're working!
    Today we have added support for Samsung Galaxy S4 Mini, Samsung Galaxy Pocket Plus, Huawei Ascend Y200 and HTC Titan!

    Octoplus Box JTAG Software v.1.9.3 Release Notes

    Added support for the following models:
    - Samsung SPH-L520 - added Dead Boot / Device Repair
    - Samsung GT-S5301L - added Dead Boot Repair
    - Huawei U8655-1 - added Dead Boot Repair
    - HTC Titan (PI39110) - added Dead Boot Repair, Repair IMEI (in Test Mode), Repair CID (in Test Mode)
    Added new Core ID (ID: 706B40E1) for MSM8960 CPU
    All pinouts and Repair procedures described in the manual ("Help" button in the Software)
     
  11. 1,747
    755
    83
    namnhatrang

    namnhatrang Super Moderator Thành viên BQT

    Tham gia ngày:
    20/10/12
    Bài viết:
    1,747
    Đã được thích:
    755
    Điểm thành tích:
    83
    Octoplus PRO JTAG Software v.1.0.1 is out!

    [​IMG]
    Octoplus PRO JTAG Software v.1.0.1 is out!

    Added support for Samsung SPH-W2700 and SKY IM-S315L.

    Octoplus PRO JTAG Software v.1.0.1 Release Notes:
    Added support for the following models:
    • Samsung SPH-W2700 - added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • SKY IM-S315L - added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    Added new Core IDs for Qualcomm CPUs
    Fixed minor issues with Downloads
    Removed download limit
    All pinouts and Repair procedures are described in the manual ("Help" button in the Software)
    IMPORTANT: In order to use Octoplus JTAG Software you need to install the latest Software version (v.1.9.5)

    [​IMG]
    Find out more at: www.octoplusbox.com
     
    Nam Tiến thích bài này.
  12. 1,747
    755
    83
    namnhatrang

    namnhatrang Super Moderator Thành viên BQT

    Tham gia ngày:
    20/10/12
    Bài viết:
    1,747
    Đã được thích:
    755
    Điểm thành tích:
    83
    Octoplus PRO JTAG Software v.1.0.2 is out!

    [​IMG]Octoplus PRO JTAG Software v.1.0.2 is out!

    We have added support for Samsung SCH-W690, SKY IM-R520S, SKY IM-U310, LG D486, LG H788 and more!

    Octoplus PRO JTAG Software v.1.0.2 Release Notes:

    Added support for the following models via JTAG:
    • Samsung SCH-W690- added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • SKY IM-R520S- added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • SKY IM-U310- added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files

    Added support for the following models via USB:
    • LG D486- added Read/Write, Easy Repair, Partition Manager, Constructor for Repair Files
    • LG H788- added Read/Write, Easy Repair, Partition Manager, Constructor for Repair Files

    IMPORTANT:We recommend to uninstall old Software version, before the installation of the latest one.
    • Updated Medusa Flasher for work with new Smart Card firmware version.
    • Added "Qualcomm HS-USB QDLoader 9008" drivers for Windows 8/10.
    • All necessary drivers will be available in installation folder.
    • Fixed issues with view of Help and pinouts.
    • All pinouts and Repair procedures described in the manual ("Help" button in the Software).
    Download Octoplus PRO JTAG Software v.1.0.2
     
    Nam Tiến thích bài này.
  13. 1,747
    755
    83
    namnhatrang

    namnhatrang Super Moderator Thành viên BQT

    Tham gia ngày:
    20/10/12
    Bài viết:
    1,747
    Đã được thích:
    755
    Điểm thành tích:
    83
    Octoplus PRO JTAG Software v.1.0.3 is out!

    [​IMG]Octoplus JTAG PRO Software v.1.0.3 is out!

    Dear Octoplus Box community!

    Today we are proud to introduce you a so long awaited solution of damaged boot phones repair using MMC protocol connection, in cases when JTAG is disabled. Though this feature will be available only for upgraded box version -Medusa Pro
    Unfortunately current Octoplus box hardware due to its limitations had to be reworked from scratch to gain more power and flexibility. Upgraded version features increased data transfer speeds, MMC protocol support and JTAG pinfinder!

    As you may have already noticed, the PRO software was released little bit earlier introducing some new outstanding features and now we are opening its full potential! More and more new phone models will be added in upcoming releases!
    For those who already enjoyed our product and wants to increase its possibilities, we have prepared an unbeated offer -Medusa Pro Upgrade Kitat a reasonable price with Free Shipping included!

    P.S.: Octoplus Pro hardware in new, elegant design will be available soon[​IMG]

    P.P.S.: Regular hardware owners can still use all the new features, except those requiring eMMC connectivity.JTAG pinfinder is available for PRO hardware only as well.PRO owners will be able to use both PRO and "old" software versions.


    Octoplus Box JTAG PRO Software v.1.0.3 Release Notes:Added Support for direct eMMC repair of the phones. *Added JTAG PIN finder. *Added support for the following models via eMMC*:
    • LG D160- added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • LG D280n- added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • LG D285- added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • LG D380- added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • LG D410- added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • LG D838- added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • LG D851- added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • LG E980- added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • LG F440L- added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • LG H345- added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • LG H443- added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • LG H525n- added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • LG H811- added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • LG H635- added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • LG L23- added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • LG LS660- added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • LG LS991- added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • LG LS996- added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • LG MS323- added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • LG MS345- added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • LG VS930- added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Samsung GT-I8190- added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Samsung GT-I9070- added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Samsung GT-I9300- added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Samsung GT-I9308- added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Samsung GT-N7108- added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Samsung SGH-T989- added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Samsung SM-J700- added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Samsung SM-N900- added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Samsung SM-N9005- added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    * Medusa PRO Box is required!Added support for the following models via JTAG:
    • LG KH1300- added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • HTC Desire 300- added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • HTC Desire 600- added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • HTC PM23300- added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Samsung SGH-I577- added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Sony Xperia LT26i- added Read/Write/Erase, Boot Repair, Partition Manager, Constructor for Repair Files
    Added support for the following models via USB:
    • LG D802- added Read/Write, Easy Repair, Partition Manager, Constructor for Repair Files
    • LG D855- added Read/Write, Easy Repair, Partition Manager, Constructor for Repair Files
    • LG F440L- added Read/Write, Easy Repair, Partition Manager, Constructor for Repair Files
    • LG LS980- added Read/Write, Easy Repair, Partition Manager, Constructor for Repair Files
    All pinouts and Repair procedures described in the manual ("Help" button in the Software).

    Download Octoplus JTAG PRO Software v.1.0.3
     
  14. 1,747
    755
    83
    namnhatrang

    namnhatrang Super Moderator Thành viên BQT

    Tham gia ngày:
    20/10/12
    Bài viết:
    1,747
    Đã được thích:
    755
    Điểm thành tích:
    83
    Octoplus JTAG PRO Software v.1.0.4 is out!

    [​IMG]Octoplus JTAG PRO Software v.1.0.4 is out!

    We have added support for LG L Fino Dual, LG L Bello Dual, LG G2 mini, Samsung Galaxy Mega 5.8 and other phones!

    Octoplus Box JTAG PRO Software v.1.0.4 Release Notes:Added support for the following models via eMMC:
    • LG D295- added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • LG D335- added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • LG D618- added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Samsung GT-I9152- added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    Added support for the following models via JTAG:
    • LG SU410- added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Samsung SPH-W6310- added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    Updated help and pinouts in Smart Repair Files for the following models (please re-download SRF files):
    • LG D280N
    • LG D285
    • LG D325
    • LG D380
    • LG D410
    • LG H345
    • LG H443
    • LG H525N
    • LG H635
    • LG H811
    • LG KH1300
    • LG L23
    • LG LS991
    • LG LS996
    • LG MS323
    • LG VS930
    • HTC Desire 300
    • HTC Desire 600
    • Samsung GT-I9070
    • Samsung GT-I9300
    • Samsung GT-I9308
    • Samsung GT-N7108
    • Samsung GT-S5310T
    • Samsung SCH-W690
    • Samsung SGH-I577
    • Samsung SGH-T746
    • Samsung SGH-T989
    • Samsung SM-J700F
    • Samsung SM-N900
    • SAMSUNG SPH-W2700
    • SKY IM-R520S
    • SKY IM-U310
    • Sony LT26I
    Added new option to continue read into the same file from the moment of interruption, then “Read” operation was not completed(software was closed or stopped responding, PC suddenly shuts down, etc.)All pinouts and Repair procedures described in the manual ("Help" button in the Software)


    Download Octoplus JTAG PRO Software v.1.0.4
     
    Nam Tiến thích bài này.
  15. 3,432
    1,591
    113
    Hữu Trí

    Hữu Trí UnlockPhone Thành viên BQT

    Tham gia ngày:
    17/5/12
    Bài viết:
    3,432
    Đã được thích:
    1,591
    Điểm thành tích:
    113
    Web:
    Octoplus/Octopus Box LG v.2.2.3 - featuring LG K4 world's 1st support!

    [​IMG]
    Octoplus/Octopus Box LG v.2.2.3 is out!
    We have added world's first support for different variants of LG K4 and support for other phones!

    Octoplus/Octopus Box LG Software v.2.2.3 Release Notes:
    Added support for the following models:
    - K120AR - added world's first Direct Unlock, Read Codes, Repair IMEI, Read/Write/Repair EEPROM, Read Full Flash, Repair BT Address, Repair Wi-Fi MAC Address, Read phone's Info
    - K120E - added world's first Direct Unlock, Read Codes, Repair IMEI, Read/Write/Repair EEPROM, Read Full Flash, Repair BT Address, Repair Wi-Fi MAC Address, Read phone's Info
    - K120F - added world's first Direct Unlock, Read Codes, Repair IMEI, Read/Write/Repair EEPROM, Read Full Flash, Repair BT Address, Repair Wi-Fi MAC Address, Read phone's Info
    - K120GT - added world's first Direct Unlock, Read Codes, Repair IMEI, Read/Write/Repair EEPROM, Read Full Flash, Repair BT Address, Repair Wi-Fi MAC Address, Read phone's Info
    - K120H - added world's first Direct Unlock, Read Codes, Repair IMEI, Read/Write/Repair EEPROM, Read Full Flash, Repair BT Address, Repair Wi-Fi MAC Address, Read phone's Info
    - K130 - added world's first Direct Unlock, Read Codes, Repair IMEI (A/B), Read/Write EEPROM, Read Full Flash, Repair BT Address, Repair Wi-Fi MAC Address, Read phone's Info
    - K130E - added world's first Direct Unlock, Read Codes, Repair IMEI (A/B), Read/Write EEPROM, Read Full Flash, Repair BT Address, Repair Wi-Fi MAC Address, Read phone's Info
    Added Reset Security operation for the following models:
    - D320, D320AG, D320AR, D320F, D320F8, D320G8, D320J8, D320N, D320TR
    Added Deactivate (McAfee) Kill Switch * operation for the following models:
    - LS990
    - VS985, VS985DU, VS985WDU
    All supported operations described in details in the manual ("Cable & Manual" button in Software)
    * In order to perform "Deactivate Kill Switch" operation, you need to do the following:
    1. Attach testpoint as shown on figure in manual, and connect phone with Micro USB cable (don't use USB hubs!).
      For some firmware versions, to put the phone into "Qualcomm-Mode", you can try to do the next: press and hold "Vol+" button and connect the phone directly to PC via micro USB cable
    2. Check PC Device Manager, a new device should appear "Qualcomm HS-USB QDLoader 9008" or "Unknown Device" if you hadn't installed a driver. Drivers are available in Installation Folder
    3. Release testpoint and press "Deactivate Kill Switch" button
    4. Follow Software instructions (prompts)
    Find out more at: www.octoplusbox.com
     
  16. 1,747
    755
    83
    namnhatrang

    namnhatrang Super Moderator Thành viên BQT

    Tham gia ngày:
    20/10/12
    Bài viết:
    1,747
    Đã được thích:
    755
    Điểm thành tích:
    83
    Octoplus JTAG PRO Software v.1.0.5 is out!

    [​IMG]
    Octoplus JTAG PRO Software v.1.0.5 is out!

    We have added a lot of new features and support for Samsung Galaxy Nexus, Samsung Galaxy S3 Duos, Samsung Galaxy Core Prime, LG G Vista, LG G4!

    Octoplus Box JTAG PRO Software v.1.0.5 Release Notes:
    Added following features for work with eMMC:
    • Read/Write/Erase eMMC Boot area partition 1
    • Read/Write/Erase eMMC Boot area partition 2
    • Added output of detailed information about eMMC chip into the software log (CID, CSD, EXTCSD Info)
    • Added auto-backup of EXT_CSD data during the “Connect” operation into "EXT_CSD Backups" folder
    Uploaded "Boot area partition 1" dumps/files for the following models into the Support Area:
    • Samsung GT-I9300
    • Samsung GT-N7108
    • LG D335
    Added support for the following models via eMMC:
    • Samsung GT-I9250 - added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Samsung GT-I9300I - added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Samsung SM-G360G - added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • LG D631 - added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • LG H815 - added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    Updated help and pinouts in Smart Repair Files for the following model (please uninstall old SRF file, download and install new one):
    • LG LS996
    Added software logs auto-backup into the "Logs" folder
    Fixed problem with displaying Unicode characters in software log
    Fixed issue with incorrect flash chip size detection (when flash chip size is less than 4GB)
    Improved option to continue read into the same file from the moment of interruption, then “Read” operation was not completed (software was closed or stopped responding, PC suddenly shuts down, etc.)
    Improved software stability
    Some GUI changes
    All pinouts and Repair procedures described in the manual ("Help" button in the Software)
    [​IMG]
     
    Nam Tiến thích bài này.
  17. 1,747
    755
    83
    namnhatrang

    namnhatrang Super Moderator Thành viên BQT

    Tham gia ngày:
    20/10/12
    Bài viết:
    1,747
    Đã được thích:
    755
    Điểm thành tích:
    83
    Octoplus JTAG PRO Software v.1.0.6 is out!

    [​IMG]

    Octoplus JTAG PRO Software v.1.0.6 is out!

    We have added support for Samsung Galaxy S III Mini, Samsung Galaxy Grand Prime, LG L70, LG L70 Dual, LG Optimus Vu and LG G3 Vigor!

    Octoplus Box JTAG PRO Software v.1.0.6 Release Notes:
    Added support for the following models via eMMC:
    • Samsung GT-I8200N- added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Samsung SM-G530P- added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • LG D320N- added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • LG D325- added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • LG F100S- added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • LG LS885- added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    Added support for the following models via USB:
    • LG F240K- added Read/Write, Easy Repair, Partition Manager, Constructor for Repair Files.
    Added ability to Read/Write EXT_CSDAdded ability to include Boot1 and Boot2 into SRF and to write these partitions during Smart RepairAll pinouts and repair procedures described in the manual ("Help" button in the Software)


    Download Octoplus JTAG PRO Software v.1.0.6
     
  18. 653
    118
    28
    toilatoi142001

    toilatoi142001 Moderators Thành viên BQT

    Tham gia ngày:
    14/7/12
    Bài viết:
    653
    Đã được thích:
    118
    Điểm thành tích:
    28
    Medusa PRO v.1.0.7 is out!

    Medusa PRO v.1.0.7 Release Notes:

    - Added ability to edit CID registry (Device identification register) for Samsung eMMC flash chips
    - Added ability to configure eMMC bus frequency
    - Added support for the following models via eMMC:

    • LG P715 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • LG D605 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • LG D325 (Hynix) - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • LG D625 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • LG H734 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files

    - Firmware of Medusa box has been updated! To update the firmware, please connect the box and only then run the Software
    - All pinouts and repair procedures described in the manual ("Help" button in the Software)


    More info and discussion are HERE
    ____________________________________
    WBR,
    Medusa Box Team
     
  19. 1,747
    755
    83
    namnhatrang

    namnhatrang Super Moderator Thành viên BQT

    Tham gia ngày:
    20/10/12
    Bài viết:
    1,747
    Đã được thích:
    755
    Điểm thành tích:
    83
    Octoplus JTAG PRO Software v.1.0.9 is out!

    [​IMG]

    Octoplus JTAG PRO Software v.1.0.9 is out!

    We have added support for LG Optimus LTE, Samsung Galaxy S Plus, Samsung Galaxy Note 8.0 and Samsung Galaxy Tab 3 8.0!

    Octoplus Box JTAG PRO Software v.1.0.9 Release Notes: Added support for the following models via eMMC:
    • LG LU6200- Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Samsung GT-I9001- Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Samsung GT-N5100- Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Samsung SM-T311- Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    Added automatic resume of read, write, erase from the moment of interruption (if connection with the phone was lost during the process, etc.) All pinouts and repair procedures described in the manual ("Help" button in the Software)
    [​IMG]

    Download Octoplus JTAG PRO Software v.1.0.9
     
  20. 2,726
    380
    83
    vuongkien79

    vuongkien79 Super Moderator Thành viên BQT

    Tham gia ngày:
    8/6/12
    Bài viết:
    2,726
    Đã được thích:
    380
    Điểm thành tích:
    83
    Nghề nghiệp:
    mobile
    Nơi ở:
    hà nội
    Octoplus JTAG PRO Software v.1.1.0 is out!

    [​IMG]Octoplus JTAG PRO Software v.1.1.0 is out!

    We have added support for LG LS990, LG D724 and LG D821!

    Octoplus Box JTAG PRO Software v.1.1.0 Release Notes: Added support for the following models via eMMC:
    • LG LS990 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • LG D724 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • LG D821 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    Added operation ETA information (Estimated Time of Accomplishment) to status bar Reduced font size of log window messages All pinouts and repair procedures described in the manual ("Help" button in the Software)
    [​IMG]Download Octoplus JTAG PRO Software v.1.1.0Find out more at: www.octoplusbox.com[​IMG][​IMG][​IMG][​IMG][​IMG][​IMG][​IMG][​IMG]
     

Chia sẻ trang này

Thành viên đang xem bài viết (Thành viên: 0, Khách: 0)

Đang tải...